Fri frakt på ordre over 500,- + mva. Se vilkår her.

Det er ingen varer i handlekurven.

Her er du: 

Santronic / Honeywell IRD 1020

Infra-red flicker detector

Varenummer: 202500

Ikke på lager

Beskrivelse

The infra-red flicker detector can be used with any one of the following control boxes: DKG 972, DLG 974, DLG 976, DMG 970, DMG 971, DMG 972, DMG 973 TFI 812.2, MMI 810, MMI 811, MMI 812, MMI 815, MMI 816, MMI 962, TMG 740-2, TMG 740-3, SGU 930, SGU 930i.

Teknisk data

  • Supply voltage 220 / 240 V (-15… +10%) 50 Hz (50 – 60 Hz)
  • Nominal current input approx. 4 mA
  • Power consumption 1 VA
  • Ambient temperature -20° C to +60° C
  • Insulation standard IP 41
  • Mounting attitude any
  • Weight 40 g
  • Flame viewing attitude side-on or end-on according to type
  • Spectral response 800 – 1100 nm
  • (with daylight filter) maximum 950 nm
  • Frequency range 15 Hz…. 250 Hz (-12 dB)
  • Sensitivity adjustment range approx. 1 : 20 (26 dB)
  • Switch-on delay < 3.5 sec. (after connecting operating voltage)
  • Response time < 0.1 sec.
  • Cut-out time < 1 sec.
  • Approved ambient parameter max. 95% at 30° C
  • – for operation -20° C… +60° C
  • – for storage -20° C… +80° C

Build-up of ice, penetration of water and condensing water are inadmissible

Approvals according to European standards EN 298, as well as all other relevant Directives and standards

Tilbehør

Ingen deleliste funnet

Det er ingen varer i handlekurven.
Menu