Det er ingen varer i handlekurven.
Det er ingen varer i handlekurven.

Her er du: 

Pumpeagregater

    Transportpumpe-agregat MOG 50-01 singel

    Transportpumpe-agregat MOG 50-01 (singel)
    Single pumping unit MOG 50 according to scheme I without bypass
     
    Single pumping unit for fuel oil in screwed or flanged compact execution, as a feed- or delivery aggregates for oil supply of automatic oil burners – equivalent DIN/EN 4755/2. Produced, tested, registered and marked according to the test standard DIN/EN 12514/1.
     
    General details:
    Operating viscosity:The motor output data applies for fluids with a viscosity up to 80 cSt. From 80 cSt to 150 cSt, the motor must be one power stage size stronger. Available at a surcharge upon request.
    Max. suction head:Measured in terms of the manometer (Pos. 5) = -0,6 bar
    Max. inlet pressure:Pressure load of the axial face seal: – 0,6 – +5 bar
    Max. nozzle loss:70% of discharge at pmax
     
    Technical details:
    Connections* Suction/pressure screwed/flanged: Pipe 12
    Aggregate type: MOG 50-01
    Discharge at 1400 min -1 / at 0 – 9 bar in l/h: 45
    Pump type series VB: VBP
    Motor output 1) in kW: 18
    Max. pressure in bar: designed for max. working pressure of 9 bar per DIN/EN 12514-1 max. working pressure of 6 bar
     
    * To insure proper pump function, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site.
     The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.
     

    Varenr: 323010

    Leveringstid 12 dager

    Transportpumpe-agregat MOG 50-01 singel

    Transportpumpe-agregat MOG 50-01 (singel)
    Single pumping unit MOG 50 according to scheme I without bypass

    For Bio olje (max viscosity 80 cSt.)
     
    Single pumping unit for fuel oil in screwed or flanged compact execution, as a feed- or delivery aggregates for oil supply of automatic oil burners – equivalent DIN/EN 4755/2. Produced, tested, registered and marked according to the test standard DIN/EN 12514/1.
     
    General details:
    Operating viscosity:The motor output data applies for fluids with a viscosity up to 80 cSt. From 80 cSt to 150 cSt, the motor must be one power stage size stronger. Available at a surcharge upon request.
    Max. suction head:Measured in terms of the manometer (Pos. 5) = -0,6 bar
    Max. inlet pressure:Pressure load of the axial face seal: – 0,6 – +5 bar
    Max. nozzle loss:70% of discharge at pmax
     
    Technical details:
    Connections* Suction/pressure screwed/flanged: Pipe 12
    Aggregate type: MOG 50-01
    Discharge at 1400 min -1 / at 0 – 9 bar in l/h: 45
    Pump type series VB: VBP
    Motor output 1) in kW: 18
    Max. pressure in bar: designed for max. working pressure of 9 bar per DIN/EN 12514-1 max. working pressure of 6 bar
     
    * To insure proper pump function, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site.
     The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.
     

    Varenr: 323010BIO

    Leveringstid 12 dager

    Transportpumpe-agregat MOG 50-02 singel

    Transportpumpe-agregat MOG 50-02 (singel)
    Single pumping unit MOG 50 according to scheme I without bypass
     
    Single pumping unit for fuel oil in screwed or flanged compact execution, as a feed- or delivery aggregates for oil supply of automatic oil burners – equivalent DIN/EN 4755/2. Produced, tested, registered and marked according to the test standard DIN/EN 12514/1.
     
    General details:
    Operating viscosity:The motor output data applies for fluids with a viscosity up to 80 cSt. From 80 cSt to 150 cSt, the motor must be one power stage size stronger. Available at a surcharge upon request.
    Max. suction head:Measured in terms of the manometer (Pos. 5) = -0,6 bar
    Max. inlet pressure:Pressure load of the axial face seal: – 0,6 – +5 bar
    Max. nozzle loss:70% of discharge at pmax

    Technical details:
    Connections* Suction/pressure screwed/flanged: Pipe 12
    Aggregate type: MOG 50-02
    Discharge at 1400 min -1 / at 0 – 9 bar in l/h: 80
    Pump type series VB: VBM
    Motor output 1) in kW: 18
    Max. pressure in bar: designed for max. working pressure of 9 bar per DIN/EN 12514-1 max. working pressure of 6 bar
     
    * To insure proper pump function, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site.
     The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.
     

    Varenr: 323020

    Leveringstid 12 dager

    Transportpumpe-agregat MOG 50-03 singel

    Transportpumpe-agregat MOG 50-03 (singel)
    Single pumping unit MOG 50 according to scheme I without bypass
     
    Single pumping unit for fuel oil in screwed or flanged compact execution, as a feed- or delivery aggregates for oil supply of automatic oil burners – equivalent DIN/EN 4755/2. Produced, tested, registered and marked according to the test standard DIN/EN 12514/1.
     
    General details:
    Operating viscosity:The motor output data applies for fluids with a viscosity up to 80 cSt. From 80 cSt to 150 cSt, the motor must be one power stage size stronger. Available at a surcharge upon request.
    Max. suction head:Measured in terms of the manometer (Pos. 5) = -0,6 bar
    Max. inlet pressure:Pressure load of the axial face seal: – 0,6 – +5 bar
    Max. nozzle loss:70% of discharge at pmax

    Technical details:
    Connections* Suction/pressure screwed/flanged: Pipe 12
    Aggregate type: MOG 50-03
    Discharge at 1400 min -1 / at 0 – 9 bar in l/h: 120
    Pump type series VB: VBG
    Motor output 1) in kW: 18
    Max. pressure in bar: designed for max. working pressure of 9 bar per DIN/EN 12514-1 max. working pressure of 6 bar
     
    * To insure proper pump function, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site.
     The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.
     

    Varenr: 323030

    Leveringstid 12 dager

    Transportpumpe-agregat MOG 50-04 singel

    Transportpumpe-agregat MOG 50-04 (singel)
    Single pumping unit MOG 50 according to scheme I without bypass
     
    Single pumping unit for fuel oil in screwed or flanged compact execution, as a feed- or delivery aggregates for oil supply of automatic oil burners – equivalent DIN/EN 4755/2. Produced, tested, registered and marked according to the test standard DIN/EN 12514/1.
     
    General details:
    Operating viscosity:The motor output data applies for fluids with a viscosity up to 80 cSt. From 80 cSt to 150 cSt, the motor must be one power stage size stronger. Available at a surcharge upon request.
    Max. suction head:Measured in terms of the manometer (Pos. 5) = -0,6 bar
    Max. inlet pressure:Pressure load of the axial face seal: – 0,6 – +5 bar
    Max. nozzle loss:70% of discharge at pmax

    Technical details:
    Connections* Suction/pressure screwed/flanged: Pipe 12
    Aggregate type: MOG 50-04
    Discharge at 1400 min -1 / at 0 – 9 bar in l/h: 160
    Pump type series VB: VBF
    Motor output 1) in kW: 18
    Max. pressure in bar: designed for max. working pressure of 9 bar per DIN/EN 12514-1 max. working pressure of 6 bar
     
    * To insure proper pump function, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site.
     The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.
     

    Varenr: 323040

    Leveringstid 12 dager

    Transportpumpe-agregat MOG 50-05 singel

    Transportpumpe-agregat MOG 50-05 (singel)
    Single pumping unit MOG 50 according to scheme I without bypass
     
    Single pumping unit for fuel oil in screwed or flanged compact execution, as a feed- or delivery aggregates for oil supply of automatic oil burners – equivalent DIN/EN 4755/2. Produced, tested, registered and marked according to the test standard DIN/EN 12514/1.
     
    General details:
    Operating viscosity:The motor output data applies for fluids with a viscosity up to 80 cSt. From 80 cSt to 150 cSt, the motor must be one power stage size stronger. Available at a surcharge upon request.
    Max. suction head:Measured in terms of the manometer (Pos. 5) = -0,6 bar
    Max. inlet pressure:Pressure load of the axial face seal: – 0,6 – +5 bar
    Max. nozzle loss:70% of discharge at pmax

    Technical details:
    Connections* Suction/pressure screwed/flanged: Pipe 18/DN 15
    Aggregate type: MOG 50-05
    Discharge at 1400 min -1 / at 0 – 9 bar in l/h: 300
    Pump type series VB: VBGP
    Motor output 1) in kW: 18
    Max. pressure in bar: designed for max. working pressure of 9 bar per DIN/EN 12514-1 max. working pressure of 6 bar
     
    * To insure proper pump function, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site.
     The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.
     

    Varenr: 323050

    Leveringstid 12 dager

    Transportpumpe-agregat MOG 50-06 singel

    Transportpumpe-agregat MOG 50-06 (singel)
    Single pumping unit MOG 50 according to scheme I without bypass
     
    Single pumping unit for fuel oil in screwed or flanged compact execution, as a feed- or delivery aggregates for oil supply of automatic oil burners – equivalent DIN/EN 4755/2. Produced, tested, registered and marked according to the test standard DIN/EN 12514/1.
     
    General details:
    Operating viscosity:The motor output data applies for fluids with a viscosity up to 80 cSt. From 80 cSt to 150 cSt, the motor must be one power stage size stronger. Available at a surcharge upon request.
    Max. suction head:Measured in terms of the manometer (Pos. 5) = -0,6 bar
    Max. inlet pressure:Pressure load of the axial face seal: – 0,6 – +5 bar
    Max. nozzle loss:70% of discharge at pmax

    Technical details:
    Connections* Suction/pressure screwed/flanged: Pipe 18/DN 15
    Aggregate type: MOG 50-06
    Discharge at 1400 min -1 / at 0 – 9 bar in l/h: 450
    Pump type series VB: VBGM
    Motor output 1) in kW: 37
    Max. pressure in bar: designed for max. working pressure of 9 bar per DIN/EN 12514-1 max. working pressure of 6 bar
     
    * To insure proper pump function, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site.
     The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.
     

    Varenr: 323060

    Leveringstid 12 dager

    Transportpumpe-agregat MOG 50-07 singel

    Transportpumpe-agregat MOG 50-07 (singel)
    Single pumping unit MOG 50 according to scheme I without bypass
     
    Single pumping unit for fuel oil in screwed or flanged compact execution, as a feed- or delivery aggregates for oil supply of automatic oil burners – equivalent DIN/EN 4755/2. Produced, tested, registered and marked according to the test standard DIN/EN 12514/1.
     
    General details:
    Operating viscosity:The motor output data applies for fluids with a viscosity up to 80 cSt. From 80 cSt to 150 cSt, the motor must be one power stage size stronger. Available at a surcharge upon request.
    Max. suction head:Measured in terms of the manometer (Pos. 5) = -0,6 bar
    Max. inlet pressure:Pressure load of the axial face seal: – 0,6 – +5 bar
    Max. nozzle loss:70% of discharge at pmax

    Technical details:
    Connections* Suction/pressure screwed/flanged: Pipe 18/DN 15
    Aggregate type: MOG 50-07
    Discharge at 1400 min -1 / at 0 – 9 bar in l/h: 600
    Pump type series VB: VBGG
    Motor output 1) in kW: 37
    Max. pressure in bar: designed for max. working pressure of 9 bar per DIN/EN 12514-1 max. working pressure of 6 bar
     
    * To insure proper pump function, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site.
     The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.
     

    Varenr: 323070

    Leveringstid 12 dager

    Transportpumpe-agregat MOG 50-08 singel

    Transportpumpe-agregat MOG 50-08 (singel)
    Single pumping unit MOG 50 according to scheme I without bypass
     
    Single pumping unit for fuel oil in screwed or flanged compact execution, as a feed- or delivery aggregates for oil supply of automatic oil burners – equivalent DIN/EN 4755/2. Produced, tested, registered and marked according to the test standard DIN/EN 12514/1.
     
    General details:
    Operating viscosity:The motor output data applies for fluids with a viscosity up to 80 cSt. From 80 cSt to 150 cSt, the motor must be one power stage size stronger. Available at a surcharge upon request.
    Max. suction head:Measured in terms of the manometer (Pos. 5) = -0,6 bar
    Max. inlet pressure:Pressure load of the axial face seal: – 0,6 – +5 bar
    Max. nozzle loss:70% of discharge at pmax

    Technical details:
    Connections* Suction/pressure screwed/flanged: Pipe DN 25
    Aggregate type: MOG 50-08
    Discharge at 1400 min -1 / at 0 – 9 bar in l/h: 1000
    Pump type series VB: VBHP
    Motor output 1) in kW: 75
    Max. pressure in bar: designed for max. working pressure of 9 bar per DIN/EN 12514-1 max. working pressure of 6 bar
     
    * To insure proper pump function, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site.
     The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.
     

    Varenr: 323080

    Leveringstid 12 dager

    Transportpumpe-agregat MOG 50-09 singel

    Transportpumpe-agregat MOG 50-09 (singel)
    Single pumping unit MOG 50 according to scheme I without bypass
     
    Single pumping unit for fuel oil in screwed or flanged compact execution, as a feed- or delivery aggregates for oil supply of automatic oil burners – equivalent DIN/EN 4755/2. Produced, tested, registered and marked according to the test standard DIN/EN 12514/1.
     
    General details:
    Operating viscosity:The motor output data applies for fluids with a viscosity up to 80 cSt. From 80 cSt to 150 cSt, the motor must be one power stage size stronger. Available at a surcharge upon request.
    Max. suction head:Measured in terms of the manometer (Pos. 5) = -0,6 bar
    Max. inlet pressure:Pressure load of the axial face seal: – 0,6 – +5 bar
    Max. nozzle loss:70% of discharge at pmax

    Technical details:
    Connections* Suction/pressure screwed/flanged: Pipe DN 25
    Aggregate type: MOG 50-09
    Discharge at 1400 min -1 / at 0 – 9 bar in l/h: 1500
    Pump type series VB: VBHM
    Motor output 1) in kW: 75
    Max. pressure in bar: designed for max. working pressure of 9 bar per DIN/EN 12514-1 max. working pressure of 6 bar
     
    * To insure proper pump function, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site.
     The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.
     

    Varenr: 323090

    Leveringstid 12 dager

    Transportpumpe-agregat MOG 50-10 singel

    Transportpumpe-agregat MOG 50-10 (singel)
    Single pumping unit MOG 50 according to scheme I without bypass
     
    Single pumping unit for fuel oil in screwed or flanged compact execution, as a feed- or delivery aggregates for oil supply of automatic oil burners – equivalent DIN/EN 4755/2. Produced, tested, registered and marked according to the test standard DIN/EN 12514/1.
     
    General details:
    Operating viscosity:The motor output data applies for fluids with a viscosity up to 80 cSt. From 80 cSt to 150 cSt, the motor must be one power stage size stronger. Available at a surcharge upon request.
    Max. suction head:Measured in terms of the manometer (Pos. 5) = -0,6 bar
    Max. inlet pressure:Pressure load of the axial face seal: – 0,6 – +5 bar
    Max. nozzle loss:70% of discharge at pmax

    Technical details:
    Connections* Suction/pressure screwed/flanged: Pipe DN 25
    Aggregate type: MOG 50-10
    Discharge at 1400 min -1 / at 0 – 9 bar in l/h: 2000
    Pump type series VB: VBHG
    Motor output 1) in kW: 110
    Max. pressure in bar: designed for max. working pressure of 9 bar per DIN/EN 12514-1 max. working pressure of 6 bar
     
    * To insure proper pump function, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site.
     The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.
     

    Varenr: 323100

    Leveringstid 12 dager

    Transportpumpe-agregat SMG 2201 dobbel

    Transportpumpe-agregat SMG 2201 (dobbel)
    Dobbel transportpumpe agregat type SMG (DIN-testet)

    Twin enhet for fyringsolje EL og L (2,8 til 34 cSt). Med HP-industri pumpe "B"  med tilbakeslagsventil, manometer, filter, kuleventil, bunnpanne og overløpsventil. Standard trykkområde 2-6 bar. Tre-fase motorer 400V
     
    Type: SMG 2201
    Pumpekapasitet L/t: 45
    Motoreffekt: 0,18 kW
    Suge/trykk tilkobling: 12 / 12 mm

    Varenr: 323160

    Leveringstid 12 dager

    Transportpumpe-agregat SMG 2202 dobbel

    Transportpumpe-agregat SMG 2202 (dobbel)
    Dobbel transportpumpe agregat type SMG (DIN-testet)

    Twin enhet for fyringsolje EL og L (2,8 til 34 cSt). Med HP-industri pumpe "B" med tilbakeslagsventil, manometer, filter, kuleventil, bunnpanne og overløpsventil. Standard trykkområde 2-6 bar. Tre-fase motorer 400V
     
    Type: SMG 2202
    Pumpekapasitet L/t: 80
    Motoreffekt: 0,18 kW
    Suge/trykk tilkobling: 12 / 12 mm

    Varenr: 323170

    Leveringstid 12 dager

    Transportpumpe-agregat SMG 2203 dobbel

    Transportpumpe-agregat SMG 2203 (dobbel)
    Dobbel transportpumpe agregat type SMG (DIN-testet)

    Twin enhet for fyringsolje EL og L (2,8 til 34 cSt). Med HP-industri pumpe "B" med tilbakeslagsventil, manometer, filter, kuleventil, bunnpanne og overløpsventil. Standard trykkområde 2-6 bar. Tre-fase motorer 400V
     
    Type: SMG 2203
    Pumpekapasitet L/t: 120
    Motoreffekt: 0,18 kW
    Suge/trykk tilkobling: 12 / 12 mm

    Varenr: 323180

    Leveringstid 12 dager

    Transportpumpe-agregat SMG 2204 dobbel

    Transportpumpe-agregat SMG 2204 (dobbel)
    Dobbel transportpumpe agregat type SMG (DIN-testet)

    Twin enhet for fyringsolje EL og L (2,8 til 34 cSt). Med HP-industri pumpe "B" med tilbakeslagsventil, manometer, filter, kuleventil, bunnpanne og overløpsventil. Standard trykkområde 2-6 bar. Tre-fase motorer 400V
     
    Type: SMG 2204
    Pumpekapasitet L/t: 160
    Motoreffekt: 0,18 kW
    Suge/trykk tilkobling: 12 / 12 mm

    Varenr: 323190

    Leveringstid 12 dager

    Transportpumpe-agregat SMG 2205 dobbel

    Transportpumpe-agregat SMG 2205 (dobbel)
    Dobbel transportpumpe agregat type SMG (DIN-testet)

    Twin enhet for fyringsolje EL og L (2,8 til 34 cSt). Med HP-industri pumpe "B" med tilbakeslagsventil, manometer, filter, kuleventil, bunnpanne og overløpsventil. Standard trykkområde 2-6 bar. Tre-fase motorer 400V
     
    Type: SMG 2205
    Pumpekapasitet L/t: 300
    Motoreffekt: 0,18 kW
    Suge/trykk tilkobling: 15 / 15 mm

    Varenr: 323200

    Leveringstid 12 dager

Det er ingen varer i handlekurven.
Menu

Lageret holder stengt i uke 29, 30 og 31. Utsendelser gjøres fra uke 32.