Det er ingen varer i handlekurven.
Det er ingen varer i handlekurven.

Her er du: 

Transportpumper

Godt utvalg av forksjellige transportpumper for olje. Høy kvalitetsprodukter som gir en sikker leveranse av olje til fyringsanlegget.

Danfoss er en av verdens største produsent av varmeprodukter og har et stort utvalg av oljepumper til de fleste installasjoner.

Større pumpeagregater for store bygg og installasjoner.

    Drivkobling pumpeunit AN

    Drivkobling pumpeunit AN

    Varenr: 1083820

    1 stk. på lager.

    Transportpumpe B/AJ 6 C

    Transportpumpe B/AJ6 190kg/t / 230l/t

    Aggregat B med Simel motor med Suntec pumpe
     
    Liter i timen: 230
    1-fas motor
    2800 omdr.
    230V 
    1-5 bar 
     
     
    NB! Husk og montere motorvernbryter og rørbruddssikring!

    Varenr: 16520

    Leveringstid 5 dager

    Transportpumpe B/AN67

    Transportpumpe B/AN67 75 kg/t / 90 l/t  

    Aggregat B med Simel motor med Suntec pumpe
    Liter i timen: 90
    1-3 bar
    1-fas motor
    2800 omdr.
    230V   
      
    NB! Husk og montere motorvernbryter og rørbruddssikring!

    Varenr: 16515

    Leveringstid 5 dager

    Transportpumpe FKJ 4

    Transportpumpe - 100 kg/t / 120 l/t 

    FKJ aggregat med Simel motor og Suntec pumpe 
     
    Liter i timen: 120
    Trykk bar: 0-3
    Strøm: 230V

    Varenr: 322070

    Leveringstid 12 dager

    Transportpumpe FKJ 6

    Transportpumpe - 165 kg/t / 200l/t

    FKJ aggregat med simel motor og Suntec pumpe

     

    Liter i timen: 200

    Trykk bar: 0-3

    El: 230V, 2.4 A, 50Hz

    Effekt: 370W

    Varenr: 322090

    Leveringstid 12 dager

    Transportpumpe FPK-S 140

    Transportpumpe - 117 kg/t / 140 l/t 
    FPK-S agregat med Simel motor og Suntec pumpe
     
    Liter i timen: 140
    Trykk bar: 1-3,5
    Strøm: 230V

    Varenr: 322010

    Transportpumpe FPK-S 50

    Transportpumpe - 42 kg/t / 50 l/t 
    FPK-S agregat med Simel motor og Suntec pumpe
     
    Liter i timen: 50
    Trykk bar: 1-3,5
    Strøm: 230V

    Varenr: 322000

    Transportpumpe-agregat MOG 50-01 singel

    Transportpumpe-agregat MOG 50-01 (singel)
    Single pumping unit MOG 50 according to scheme I without bypass
     
    Single pumping unit for fuel oil in screwed or flanged compact execution, as a feed- or delivery aggregates for oil supply of automatic oil burners – equivalent DIN/EN 4755/2. Produced, tested, registered and marked according to the test standard DIN/EN 12514/1.
     
    General details:
    Operating viscosity:The motor output data applies for fluids with a viscosity up to 80 cSt. From 80 cSt to 150 cSt, the motor must be one power stage size stronger. Available at a surcharge upon request.
    Max. suction head:Measured in terms of the manometer (Pos. 5) = -0,6 bar
    Max. inlet pressure:Pressure load of the axial face seal: – 0,6 – +5 bar
    Max. nozzle loss:70% of discharge at pmax
     
    Technical details:
    Connections* Suction/pressure screwed/flanged: Pipe 12
    Aggregate type: MOG 50-01
    Discharge at 1400 min -1 / at 0 – 9 bar in l/h: 45
    Pump type series VB: VBP
    Motor output 1) in kW: 18
    Max. pressure in bar: designed for max. working pressure of 9 bar per DIN/EN 12514-1 max. working pressure of 6 bar
     
    * To insure proper pump function, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site.
     The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.
     

    Varenr: 323010

    Leveringstid 12 dager

    Transportpumpe-agregat MOG 50-01 singel

    Transportpumpe-agregat MOG 50-01 (singel)
    Single pumping unit MOG 50 according to scheme I without bypass

    For Bio olje (max viscosity 80 cSt.)
     
    Single pumping unit for fuel oil in screwed or flanged compact execution, as a feed- or delivery aggregates for oil supply of automatic oil burners – equivalent DIN/EN 4755/2. Produced, tested, registered and marked according to the test standard DIN/EN 12514/1.
     
    General details:
    Operating viscosity:The motor output data applies for fluids with a viscosity up to 80 cSt. From 80 cSt to 150 cSt, the motor must be one power stage size stronger. Available at a surcharge upon request.
    Max. suction head:Measured in terms of the manometer (Pos. 5) = -0,6 bar
    Max. inlet pressure:Pressure load of the axial face seal: – 0,6 – +5 bar
    Max. nozzle loss:70% of discharge at pmax
     
    Technical details:
    Connections* Suction/pressure screwed/flanged: Pipe 12
    Aggregate type: MOG 50-01
    Discharge at 1400 min -1 / at 0 – 9 bar in l/h: 45
    Pump type series VB: VBP
    Motor output 1) in kW: 18
    Max. pressure in bar: designed for max. working pressure of 9 bar per DIN/EN 12514-1 max. working pressure of 6 bar
     
    * To insure proper pump function, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site.
     The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.
     

    Varenr: 323010BIO

    Leveringstid 12 dager

    Transportpumpe-agregat MOG 50-02 singel

    Transportpumpe-agregat MOG 50-02 (singel)
    Single pumping unit MOG 50 according to scheme I without bypass
     
    Single pumping unit for fuel oil in screwed or flanged compact execution, as a feed- or delivery aggregates for oil supply of automatic oil burners – equivalent DIN/EN 4755/2. Produced, tested, registered and marked according to the test standard DIN/EN 12514/1.
     
    General details:
    Operating viscosity:The motor output data applies for fluids with a viscosity up to 80 cSt. From 80 cSt to 150 cSt, the motor must be one power stage size stronger. Available at a surcharge upon request.
    Max. suction head:Measured in terms of the manometer (Pos. 5) = -0,6 bar
    Max. inlet pressure:Pressure load of the axial face seal: – 0,6 – +5 bar
    Max. nozzle loss:70% of discharge at pmax

    Technical details:
    Connections* Suction/pressure screwed/flanged: Pipe 12
    Aggregate type: MOG 50-02
    Discharge at 1400 min -1 / at 0 – 9 bar in l/h: 80
    Pump type series VB: VBM
    Motor output 1) in kW: 18
    Max. pressure in bar: designed for max. working pressure of 9 bar per DIN/EN 12514-1 max. working pressure of 6 bar
     
    * To insure proper pump function, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site.
     The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.
     

    Varenr: 323020

    Leveringstid 12 dager

    Transportpumpe-agregat MOG 50-03 singel

    Transportpumpe-agregat MOG 50-03 (singel)
    Single pumping unit MOG 50 according to scheme I without bypass
     
    Single pumping unit for fuel oil in screwed or flanged compact execution, as a feed- or delivery aggregates for oil supply of automatic oil burners – equivalent DIN/EN 4755/2. Produced, tested, registered and marked according to the test standard DIN/EN 12514/1.
     
    General details:
    Operating viscosity:The motor output data applies for fluids with a viscosity up to 80 cSt. From 80 cSt to 150 cSt, the motor must be one power stage size stronger. Available at a surcharge upon request.
    Max. suction head:Measured in terms of the manometer (Pos. 5) = -0,6 bar
    Max. inlet pressure:Pressure load of the axial face seal: – 0,6 – +5 bar
    Max. nozzle loss:70% of discharge at pmax

    Technical details:
    Connections* Suction/pressure screwed/flanged: Pipe 12
    Aggregate type: MOG 50-03
    Discharge at 1400 min -1 / at 0 – 9 bar in l/h: 120
    Pump type series VB: VBG
    Motor output 1) in kW: 18
    Max. pressure in bar: designed for max. working pressure of 9 bar per DIN/EN 12514-1 max. working pressure of 6 bar
     
    * To insure proper pump function, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site.
     The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.
     

    Varenr: 323030

    Leveringstid 12 dager

    Transportpumpe-agregat MOG 50-04 singel

    Transportpumpe-agregat MOG 50-04 (singel)
    Single pumping unit MOG 50 according to scheme I without bypass
     
    Single pumping unit for fuel oil in screwed or flanged compact execution, as a feed- or delivery aggregates for oil supply of automatic oil burners – equivalent DIN/EN 4755/2. Produced, tested, registered and marked according to the test standard DIN/EN 12514/1.
     
    General details:
    Operating viscosity:The motor output data applies for fluids with a viscosity up to 80 cSt. From 80 cSt to 150 cSt, the motor must be one power stage size stronger. Available at a surcharge upon request.
    Max. suction head:Measured in terms of the manometer (Pos. 5) = -0,6 bar
    Max. inlet pressure:Pressure load of the axial face seal: – 0,6 – +5 bar
    Max. nozzle loss:70% of discharge at pmax

    Technical details:
    Connections* Suction/pressure screwed/flanged: Pipe 12
    Aggregate type: MOG 50-04
    Discharge at 1400 min -1 / at 0 – 9 bar in l/h: 160
    Pump type series VB: VBF
    Motor output 1) in kW: 18
    Max. pressure in bar: designed for max. working pressure of 9 bar per DIN/EN 12514-1 max. working pressure of 6 bar
     
    * To insure proper pump function, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site.
     The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.
     

    Varenr: 323040

    Leveringstid 12 dager

    Transportpumpe-agregat MOG 50-05 singel

    Transportpumpe-agregat MOG 50-05 (singel)
    Single pumping unit MOG 50 according to scheme I without bypass
     
    Single pumping unit for fuel oil in screwed or flanged compact execution, as a feed- or delivery aggregates for oil supply of automatic oil burners – equivalent DIN/EN 4755/2. Produced, tested, registered and marked according to the test standard DIN/EN 12514/1.
     
    General details:
    Operating viscosity:The motor output data applies for fluids with a viscosity up to 80 cSt. From 80 cSt to 150 cSt, the motor must be one power stage size stronger. Available at a surcharge upon request.
    Max. suction head:Measured in terms of the manometer (Pos. 5) = -0,6 bar
    Max. inlet pressure:Pressure load of the axial face seal: – 0,6 – +5 bar
    Max. nozzle loss:70% of discharge at pmax

    Technical details:
    Connections* Suction/pressure screwed/flanged: Pipe 18/DN 15
    Aggregate type: MOG 50-05
    Discharge at 1400 min -1 / at 0 – 9 bar in l/h: 300
    Pump type series VB: VBGP
    Motor output 1) in kW: 18
    Max. pressure in bar: designed for max. working pressure of 9 bar per DIN/EN 12514-1 max. working pressure of 6 bar
     
    * To insure proper pump function, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site.
     The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.
     

    Varenr: 323050

    Leveringstid 12 dager

    Transportpumpe-agregat MOG 50-06 singel

    Transportpumpe-agregat MOG 50-06 (singel)
    Single pumping unit MOG 50 according to scheme I without bypass
     
    Single pumping unit for fuel oil in screwed or flanged compact execution, as a feed- or delivery aggregates for oil supply of automatic oil burners – equivalent DIN/EN 4755/2. Produced, tested, registered and marked according to the test standard DIN/EN 12514/1.
     
    General details:
    Operating viscosity:The motor output data applies for fluids with a viscosity up to 80 cSt. From 80 cSt to 150 cSt, the motor must be one power stage size stronger. Available at a surcharge upon request.
    Max. suction head:Measured in terms of the manometer (Pos. 5) = -0,6 bar
    Max. inlet pressure:Pressure load of the axial face seal: – 0,6 – +5 bar
    Max. nozzle loss:70% of discharge at pmax

    Technical details:
    Connections* Suction/pressure screwed/flanged: Pipe 18/DN 15
    Aggregate type: MOG 50-06
    Discharge at 1400 min -1 / at 0 – 9 bar in l/h: 450
    Pump type series VB: VBGM
    Motor output 1) in kW: 37
    Max. pressure in bar: designed for max. working pressure of 9 bar per DIN/EN 12514-1 max. working pressure of 6 bar
     
    * To insure proper pump function, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site.
     The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.
     

    Varenr: 323060

    Leveringstid 12 dager

    Transportpumpe-agregat MOG 50-07 singel

    Transportpumpe-agregat MOG 50-07 (singel)
    Single pumping unit MOG 50 according to scheme I without bypass
     
    Single pumping unit for fuel oil in screwed or flanged compact execution, as a feed- or delivery aggregates for oil supply of automatic oil burners – equivalent DIN/EN 4755/2. Produced, tested, registered and marked according to the test standard DIN/EN 12514/1.
     
    General details:
    Operating viscosity:The motor output data applies for fluids with a viscosity up to 80 cSt. From 80 cSt to 150 cSt, the motor must be one power stage size stronger. Available at a surcharge upon request.
    Max. suction head:Measured in terms of the manometer (Pos. 5) = -0,6 bar
    Max. inlet pressure:Pressure load of the axial face seal: – 0,6 – +5 bar
    Max. nozzle loss:70% of discharge at pmax

    Technical details:
    Connections* Suction/pressure screwed/flanged: Pipe 18/DN 15
    Aggregate type: MOG 50-07
    Discharge at 1400 min -1 / at 0 – 9 bar in l/h: 600
    Pump type series VB: VBGG
    Motor output 1) in kW: 37
    Max. pressure in bar: designed for max. working pressure of 9 bar per DIN/EN 12514-1 max. working pressure of 6 bar
     
    * To insure proper pump function, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site.
     The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.
     

    Varenr: 323070

    Leveringstid 12 dager

    Transportpumpe-agregat MOG 50-08 singel

    Transportpumpe-agregat MOG 50-08 (singel)
    Single pumping unit MOG 50 according to scheme I without bypass
     
    Single pumping unit for fuel oil in screwed or flanged compact execution, as a feed- or delivery aggregates for oil supply of automatic oil burners – equivalent DIN/EN 4755/2. Produced, tested, registered and marked according to the test standard DIN/EN 12514/1.
     
    General details:
    Operating viscosity:The motor output data applies for fluids with a viscosity up to 80 cSt. From 80 cSt to 150 cSt, the motor must be one power stage size stronger. Available at a surcharge upon request.
    Max. suction head:Measured in terms of the manometer (Pos. 5) = -0,6 bar
    Max. inlet pressure:Pressure load of the axial face seal: – 0,6 – +5 bar
    Max. nozzle loss:70% of discharge at pmax

    Technical details:
    Connections* Suction/pressure screwed/flanged: Pipe DN 25
    Aggregate type: MOG 50-08
    Discharge at 1400 min -1 / at 0 – 9 bar in l/h: 1000
    Pump type series VB: VBHP
    Motor output 1) in kW: 75
    Max. pressure in bar: designed for max. working pressure of 9 bar per DIN/EN 12514-1 max. working pressure of 6 bar
     
    * To insure proper pump function, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site.
     The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.
     

    Varenr: 323080

    Leveringstid 12 dager

Det er ingen varer i handlekurven.
Menu

Lageret holder stengt i uke 29, 30 og 31. Utsendelser gjøres fra uke 32.