Det er ingen varer i handlekurven.
Det er ingen varer i handlekurven.

Her er du: 

Målere/alarmer

    Adapter / overgang 6mm

     

    n

    Varenr: 535608

    10 stk. på lager.

    Afrisio Unitop 4000 tankmåler 3 - 4 m

    Varenr: 651225

    1 stk. på lager.

    Afriso DTA 10 - Digital tankmåler (BIO)

    Afriso DTA 10

    • For fuel oil EL, L, diesel fuel, biodiesel, water and other media with a density from 0.5 to 1,5 g/cm3
    • Universal application in tanks of a height of up to 4 meter
    • Push-to-Read function: Fast start with just a push of a button

     

    Application:
    Location-independent level measurement with digital display and minimum level signal (reserve level alarm) with a single measurement. Suitable for tanks up to 400 cm liquid level. For fuel oil EL, L or diesel fuel, FAME 100 % as biodiesel (EN 14214) and water (no drinking water!). In addition, DTA 10 can be used for level measurement with all non-corrosive liquids with a density from 0.5 to 1.5 g/cm3. Remote measurements up to 15 m.


    Description:

    The electro-pneumatic tank contents indicator DTA 10 consists of a battery-operated control unit with digital display and a measuring line. Measured values are displayed in litres, % and liquid level (cm). Simple operation and setup via three function keys. Measurements are requested by means of pressing the control key (Push-to-Read function). If the level falls below a minimum level that is freely adjustable as a percentage, the backlight of the display flashes red to indicate an alarm during the measurement. Standard tank shapes (linear, spherical, cylindrical and horizontal) are stored. Measuring line connection for hose with 4 mm inside diameter.

     

    Technical Specifications:

    Functions
    Push-to-Read level measurement
    Measuring range (tank height)
    0/400 cm (fuel oil)
    0/350 cm (water)
    Measuring accuracy
    ±1.0 cm
    Operating temperature range
    Ambient: 0/50 °C
    Storage: -20/+65 °C
    Medium: 0/50 °C
    Display
    Multi-coloured, backlit
    graphical display (30 x 50 mm).
    -Blue = Operation
    -Red = Alarm
    -Green = Setup
    Indication of litres (5 digits),
    % or liquid level in cm.
    Measuring line
    PVC hose 4 x 1 mm
    Length 20 m
    Balance chamber stainless steel
    Supply voltage
    9 V monobloc battery
    Visual alarm
    Backlight flashes red
    during measurement process
    Housing
    Wall mounting housing made of impact-resistant
    plastic (ABS)
    W x H x D: 100 x 188 x 65 mm
    Degree of protection: IP 20 (EN 60529)
    Scope of delivery
    -Control unit
    -9 V monobloc battery
    -20 m measuring line with balance chamber
    -Connection kit for G½, G1, G1½ and G2
    -25 x nail cable clips, 2 x hose clamps
    -Hose adapter (4 mm)
    -Mounting accessories

    Varenr: 52145

    Leveringstid 12 dager

    Contoil® VZF 15 (BIO)

    CONTOIL® VZF 15
     

     
    Kan brukes med BIO olje.
     
    n n n n n n n n n n n n n n n n n n n n n n
    n

    Oljemengdemåler med elektronisk telleverk/display

    n
    n

    Viser akkumulert mengde, men også gjennomstrømning (l/h)

    n
    n

    Signalutgang 4-20 mA, 2 stk. puls-utganger

    n
    n

    Måleområde: 20…600 l/h

    n
    n

    Maks kontinuerlig belastning: 400 l/h

    n
    n

    Dimensjon: DN15 (GJENGET)

    n
    n

    Temperatur: maks 130 °C

    n

    nn


     

    Varenr: 95506

    Leveringstid 20 dager

    Contoil® VZO 15 (BIO)

    CONTOIL® VZO 15
    versions for special requirements / applications

    Kan brukes med BIO olje.
     
    For applications requiring an increased accuracy of ±0.5 % or better, such as:
    • Measurement of EL heating fuel or diesel in testing facilities
    • Differential measurement
    • Commercial transactions for which the meters are legally required to have type approval or official verification.
      These products require dirt filters with smaller mesh size.
    Versions for differential measurements
    For differential measurements, the flow is measured in the supply and return pipes. The difference between the two measurements is regarded as the consumption.
    To obtain optimal measurement results, VZFA or VZOA CONTOIL® fuel oil meters calibrated in pairs should only be used, which are adapted precisely to the plant/system operating conditions. The flow rate occurring in each meter, the permissible pressure drop and the viscosity of the fluid must all be considered during the design phase. The load on the meter is obtained as follows: flow in supply section less consumption = flow in return section.
     
    When the order is placed, the following information is required:
    • application                          e.g. differential measurement for industrial furnaces
    • fuel type                             e.g. diesel fuel
    • temperature                       e.g. 15...40° C
    • operating pressure               e.g. 4 bar
    • flow rate in supply section    e.g. fixed pumping rate 200 l/h
    • flow rate in return section     e.g. 120...190 l/h (for a consumption of 10...80 l/h)
    The meters are marked supply and return during calibration and final testing in the factory. They must then be installed in the correct pipes.
    For further information on the subject of differential measurement, see the sections How to obtain an optimal measurement and "Application examples".
     
    Versions with type approval or official verification
    CONTOIL® fuel oil meters are used almost exclusively for the measurement of the consumption of fuel oil. The metrological standards (such as MID or EC guideline 71/319/EEC), however, regulate the requirements for meters and systems used for commercial transactions as well as the procedures for design approval and official verification. Measuring installations where a fluid is sold are regarded as transfer points that require official verification. These include petrol pumps at petrol stations, measuring devices for road tankers and measuring stations for loading and unloading all types of road vehicles. As a rule, a metering system must be ready for use and be checked and sealed by the
    local office responsible for transfer verification.
     
    Typical of these applications is the narrow range of use with regard to liquid, flow rate and temperature. Subject to type approval restictions, CONTOIL® oil meters are also available with metrological type approval or official verification. The differences in products relate only to the design or specifications of the meter and not to the quality of the product.
     
     
    • Versions for optimal results from differential measurement or for fiscal or commercial transactions
    • VZFA with electronic display of total volume, resettable volume and flow rate; units of measurement: litres, US gallons 2) or m3.
    • VZOA with display of total volume on roller counter; units of measurement: litres.

    Varenr: 130312

    Leveringstid 3 dager

    Contoil® VZO 15 m/puls RV1 (BIO)

    CONTOIL® VZO 15 m/puls RV1
     
    Kan brukes med BIO olje.

    Varenr: 130342

    Leveringstid 12 dager

    Contoil® VZO 20

    CONTOIL® VZO 20 RV1 
    •  Volume display on roller counter, in litresn
    • fuel oil meter with threaded or flanged endsn
    • for horizontal, vertical or inclined mounting

     

    This type of pulser is integrated into the roller counter and thus is especially appropriate for remotentotalisation. For other applications the IN inductive pulser is preferable.

    nSwitching element: • Reed switch with dry contact (inert gas)n
    Switching voltage: • max. 48 V AC/DCn
    Switching current: • max. 50 mA (Ri = 47 ?/0.5 W)n
    Quiescent current: • Open Contactn
    Switching power: • max. 2 Wn
    ON-time: • 50% ± 10%n
    Temperature: • Ambient -10 … +70° Cn
    Protection class: • IP 65 (IEC 60529) against water-jets and dustn
    Connections: • Cast-in cable, length 3 mn
    Cable cross section: • 2 x 0.14 mm2 

     

    Varenr: 130313

    Leveringstid 5 dager

    Contoil® VZO 20 RV1 m/puls

    CONTOIL® VZO 20 RV1 
    •  Volume display on roller counter, in litresn
    • fuel oil meter with threaded or flanged endsn
    • for horizontal, vertical or inclined mounting

     

    This type of pulser is integrated into the roller counter and thus is especially appropriate for remotentotalisation. For other applications the IN inductive pulser is preferable.

    nSwitching element: • Reed switch with dry contact (inert gas)n
    Switching voltage: • max. 48 V AC/DCn
    Switching current: • max. 50 mA (Ri = 47 ?/0.5 W)n
    Quiescent current: • Open Contactn
    Switching power: • max. 2 Wn
    ON-time: • 50% ± 10%n
    Temperature: • Ambient -10 … +70° Cn
    Protection class: • IP 65 (IEC 60529) against water-jets and dustn
    Connections: • Cast-in cable, length 3 mn
    Cable cross section: • 2 x 0.14 mm2 

     

    Varenr: 130344

    Leveringstid 5 dager

    Contoil® VZO 4 (BIO)

    CONTOIL® VZO 4
     
    Kan brukes med BIO-olje. 
    • oil meter with internal threaded connections located on the bottom plate
    • with mechanical roller counter, volume display in litres
    • meters in US-Gallons 2)
    • for mounting in horizontal, vertical and inclined positions
    • VZOA 4 and 8 with EEC legal verification
      Option: Reed pulser 48 V
     

    Varenr: 26200

    Contoil® VZO 4 m/puls (BIO)

    Varenr: 26212

    2 stk. på lager.

    Contoil® VZO 8 (BIO)

    CONTOIL® VZO 8
     
    Kan brukes med BIO-olje.  
    • oil meter with internal threaded connections located on the bottom plate
    • with mechanical roller counter, volume display in litres
    • meters in US-Gallons 2)
    • for mounting in horizontal, vertical and inclined positions
    • VZOA 4 and 8 with EEC legal verification
      Option: Reed pulser 48 V

    Varenr: 26205

    Contoil® VZO 8 m/puls (BIO)

    Varenr: 26215

    2 stk. på lager.

    Dataoverføringsenhet DTM-1

    Tilbehør til Smart Box

    Dataoverføringsenhet DTM-1

    n

    Varenr: 651775

    Leveringstid 12 dager

    Dataoverføringsenhet DTM-3

    Tilbehør til Smart Box

    Dataoverføringsenhet DTM-3
    Analog 4-20mA

    Varenr: 651776

    Leveringstid 12 dager

    Filter til VZO 4

    Varenr: 26201

    3 stk. på lager.

    Filter til VZO 8

    Varenr: 26202

    3 stk. på lager.

Det er ingen varer i handlekurven.
Menu

Lageret holder stengt i uke 29, 30 og 31. Utsendelser gjøres fra uke 32.